Audi A4 1.8T Quattro - Limited Edition. BHP Dyno: 243.1 BHP. Registration (R21 NCS) - This vehicle comes with its own private registration, and will be transferred to the new owner. Welcome to the sale of this fully restored Audi A4 1.8T Quattro - Limited Edition Model. Please note: This vehicle is also advertised on the "Audi Owners Club" website, which i have been an active member for many years, and with pride.
This is also my 4th Audi Quattro that I have restored over the past 10 years, where I feel proud to be part of a thorough enjoyable process. This "Limited Edition" model of Audi B6 was only manufactured during the year of 2004, and according to the vehicle database there only 121 vehicles ever manufactured by Audi Germany. Therefore, a future collectable Audi Quattro. Please read fully, as there has been no expense spared during its.This restoration has taken 14 months to complete, and was completed by engineering professionals from all disciplines. All work completed has full documentation, all receipts are addressed to myself, with an extensive service history. List of restoration work completed. All restorations require a full and extensive bodywork respray.
All window seals, side skirts, doors handle and door sills, bonnet, front and rear bumper were removed to achieve an professional standard. (additional pictures can be provided). New SACH clutch and flywheel (400 miles ago). New Turbo KO3 Stage 3 Hybrid (Turbo Clinic Leeds). The original turbo unit for this vehicle was the standard KO3 (163bhp), with was then upgraded to the KO3s for the Audi A4 BEX (190bhp Twin Intercooler).
Careful consideration was given whether or not to upgrade to the stage 3 hybrid KO3 turbo. Considering the amount of time and research given, we decided that the financial investment of this unit would increase the drive-ability and reliability of this vehicle. The initial BFB engine only housed a single sided intercooler, however research stated that power-loss and decrease in MPG, were due to insufficient air cooling. Therefore a twin sided intercooler, as well a front mounted intercooler was installed to maintain a constant torque and BHP during acceleration.The Audi B6 Ecu is a constant adapting system which required a bespoke tuning adaptation which was completed over a 8 week assessment. Full Dyno was completed on the 8th April 2019. The dyno was a hub dyno, and not the crank. This is the most accurate way to deciding what BHP your vehicle is producing.
Engine Bhp: 243.1 BHP (30% reduction of the Quattro drivetrain) - Hub BHP 187 Bhp. Engine Torque: 256.5 Lbft. New Windscreen and front side windows. During examination of the vehicle, there were two minor stone chips on the windscreen, and wear and tear minor scratches on the side windows. None of these marks were noticeable, but I knew they were there so we changed them as a course of action.
(Full receipts present plus photos whilst being changed). There's is not much to say about this, there were severe curb marks on all 4 wheels, and now they look good. New Brake discs all around, drilled and grooved. Factory OEM brake discs were originally drilled and grooved, however these replacements had to be sourced from Germany by "Performance Direct", bespoke parts supplier for sports cars.Factory standard Bosch brake pads are adequate for normal driving conditions, however during a spirited drive you may experience a brake fade. Subsequently all brake pads were replaced with performance brake pads.
New Headlights - OEM Quality. On removal of the front bumper and bonnet, its was the perfect opportunity to inspect and replace the headlight units if needed. We found that both units were fully functioning but there was scope for improvement. All four of the brake hoses were corroded, and at some point in the future would not be MOT compliant.
Therefore a brake fluid change was required due to mileage. Full stainless exhaust system, including sports Cat and resonators.
In my personal opinion every vehicle should be fitted with a OEM exhaust system, this is due to the quality of imported exhaust system not being of the same excellent quality. New drop links and bottom arms.
Once again, normal wear and tear items, there should be replaced during Audi mileage recommendation. Replaced leather interior - Excellent condition. The original seats were looking tired, and there were two tears in the drivers bolsters. As you see the replacement seats are in excellent condition. Please feel free to contact myself regarding any additional information that you may need.
The item "Audi A4 1.8t Quattro Limited Edition 243.1 Bhp (Dyno)" is in sale since Wednesday, May 1, 2019. This item is in the category "Cars, Motorcycles & Vehicles\Cars\Audi".
The seller is "huxleymyson" and is located in Barnsley. This item can be shipped to United Kingdom.